Average Reviews:
(More customer reviews)Item arrived with all specified parts and in working order (including the drill bit)
Installation is a little time consuming, so don't take this on if it's your first try at car audio / video. Unfortunately there were no instructions, and wires on the harness from the camera were unlabeled but luckily they were easy to figure out.
The video out line is easy to spot as its the industry standard yellow RCA cable (17' extension included)
The positive voltage that powers the camera is the wire that has the fuse in it (this line connects to the white back-up light in your tail lights and powers the camera)
The remaining line is the ground and can be attached to almost any bare metal on vehicle, I usually choose a screw somewhere close.
The cables included are long, but you may need to an extension for the power wire (to tell the receiver when to turn on the rear view monitor). I chose to extend the wire from the tail light so the video camera and the receiver got the same signal.
The top of the camera is not noted, so you'll have to adjust it after installation.
The camera automatically adjusts between regular and IR mode and the LED's around the lens will not light up. You'll know when it's in IR mode as the picture will change from color to B&W.
The field of view is a little constricted compared to many cameras, but its enough for me (I can't see the corners of the vehicle, but can see behind me).
Click Here to see more reviews about: PYLE PLCM22IR Flush Mount Rear View Camera with 0.5 Lux Night Vision
Get 75% OFF
No comments:
Post a Comment